Dell 1081AD, User Manual

Page: 79 / 140

OBWI Operation
xxx | xxx
71
5 Type the address of up to four management workstations that are allowed to
manage this switch in the Allowable Managers fields. Alternatively, you may
leave these fields blank to allow any station to manage the SCS.
6 Click Save .
Auditing Event Settings
An event is a notification sent by the switch to a management station
indicating that something has occurred that may require further attention.
To enable individual events:
1 Click Auditing to open the Events screen.
2 Specify the events that will generate notifications by clicking the
appropriate checkboxes in the list.
-or-
Select or clear the checkbox next to Event Name to select or deselect
the entire list.
3 Click Save .
Setting Event Destinations
You can configure audit events to be sent to SNMP trap destinations and Syslog
devices. The events enabled on the Events screen are sent to all the devices
listed on the Event Destination screen.
1 Click Auditing and the Destinations tab to open the Event Destinations
screen.
2 Type the address of up to four management workstations to which this
switch will send events in the SNMP Trap Destination fields, as well as up
to four Syslog devices.
3 Click Save .