Dell 1081AD, User Manual

Page: 33 / 140

Installation
xxx | xxx
25
Number Description Number Description
1
SCS (16-Port Model
Shown)
7 ACI Connection
2 Power Cord 8
External Virtual Media - USB
Connections
3 Analog Users (2) 9 Target Device Ports
4
Digital User (requires
the RAK)
10 SIPs
5 LAN/Network 11 Servers/Target Devices
6
10101 Console Setup
Port
Table 2.1: Basic SCS Configuration Descriptions
NOTE:
The SCS switch supports connecting to another appliance via an ACI
connection. This connection requires that the secondary appliance in the tier have an
ACI connector on the user side.
To connect and turn on your SCS:
CAUTION:
To reduce the risk of electric shock or damage to your
equipment, do not disable the jumper cord grounding plug. The grounding
plug is an important safety feature. Plug the jumper cord into a grounded
(earthed) outlet that is easily accessible at all times. Disconnect the power
from the unit by unplugging the jumper cord from either the power source or
the unit.
NOTE:
If the building has 3-phase AV power, ensure that the computer and monitor are
on the same phase to avoid potential phase-related video and/or keyboard problems.
NOTE:
The maximum supported cable length from SCS to server is 30 meters.
• Do not disable the power grounding plug. The grounding plug is an
important safety feature.