圖
33. Identifying connectors on the expansion card riser 3 (alternate)
a. expansion card slot 6
b. power connector (for GPU cards)
後續步驟
1. If applicable, remove or install an expansion card on the riser.
2. If applicable, replace the expansion card riser.
3. Complete the tasks listed in After working inside your system section in this document.
相關工作
Before working inside your system
After working inside your system
相關參考
Installing expansion card risers
事前準備作業
1. Ensure that you read the Safety instructions section in this document.
2. Complete the tasks listed in Before working inside your system section in this document.
3. If applicable, reinstall the expansion card(s) into the expansion card riser 1.
警示
:
許多維修僅可由獲得認可的維修技術人員來完成。
您
只能依照
產
品說明文件中的授權說明或在線上或電話服務和支援團隊
的指導下，執行故障排除和簡單的維修。由未經
Dell
授權的維修造成的損壞不在保固範圍之內。請閱讀並遵循隨
產
品寄送的安
全指示。
步驟
1. Align the expansion card riser with the connectors and the riser guides on the system board.
2. Lower the expansion card riser into place until the expansion card riser is fully seated in the connector.
後續步驟
1. Install the expansion card(s) into the expansion card risers 2 or 3.
2. Complete the tasks listed in After working inside your system section in this document.
3. Install any device drivers required for the card as described in the documentation for the card.
Installing and removing system components
77
