Before working inside your system
事前準備作業
Follow the safety guidelines listed in the Safety instructions section.
步驟
1. Turn off the system, including any attached peripherals.
2. Disconnect the system from the electrical outlet and disconnect the peripherals.
3. If installed, remove the front bezel.
4. If applicable, remove the system from the rack.
For more information, see the
Rack Installation
placemat at
Dell.com/poweredgemanuals
.
5. Remove the system cover.
相關參考
After working inside your system
事前準備作業
Follow the safety guidelines listed in the Safety instructions section.
步驟
1. Install the system cover.
2. If applicable, install the system into the rack.
For more information, see the
Rack Installation
placemat at
Dell.com/poweredgemanuals
.
3. If removed, install the front bezel.
4. Reconnect the peripherals and connect the system to the electrical outlet.
5. Turn on the system, including any attached peripherals.
相關參考
建議的工具
您
需要下列工具來進行卸下和安裝程序：
•
前蓋鎖的金鑰。
只有在
您
的系統包含前蓋時需要金鑰。
•
Phillips 2
號螺絲起子
•
接地腕帶
Front bezel (optional)
The front bezel is attached to the front side of the server and prevents accidents while removing the hard drive or when pressing the
reset or power button. The front bezel can also be locked for additional security.
44
Installing and removing system components