警示
:
許多維修僅可由獲得認可的維修技術人員來完成。
您
只能依照
產
品說明文件中的授權說明或在線上或電話服務和支援團隊
的指導下，執行故障排除和簡單的維修。由未經
Dell
授權的維修造成的損壞不在保固範圍之內。請閱讀並遵循隨
產
品寄送的安
全指示。
警示
:
Do not use your system without the PCIe card holder installed. The PCIe card holder is necessary to ensure proper
system cooling.
步驟
1. Align the PCIe card holder with the notches and tabs on the PSU cage.
2. Press the release tab and slide PCIe card holder toward the front of the chassis until firmly seated.
後續步驟
1. If applicable, replace the full-length PCIe card.
2. Complete the tasks listed in After working inside your system section in this document.
相關工作
Before working inside your system
After working inside your system
相關參考
Opening and closing the PCIe card holder latch
事前準備作業
1. Ensure that you read the Safety instructions section in this document.
2. Complete the tasks listed in Before working inside your system section in this document.
警示
:
許多維修僅可由獲得認可的維修技術人員來完成。
您
只能依照
產
品說明文件中的授權說明或在線上或電話服務和支援團隊
的指導下，執行故障排除和簡單的維修。由未經
Dell
授權的維修造成的損壞不在保固範圍之內。請閱讀並遵循隨
產
品寄送的安
全指示。
步驟
1. To open the PCIe card holder latch, press the release tab.
2. To close the PCIe card holder latch, rotate the latch clockwise until it locks.
註
:
Before installing a full-length PCIe card, the PCIe card holder latch must be closed. When the full-length PCIe
card is installed, open the PCIe card holder latch. Before removing the full-length PCIe card, you must close the
PCIe card holder latch.
圖
43. Opening and closing the PCIe card holder latch
a. PCIe card holder
b. release tab
c. PCIe card holder latch
Installing and removing system components
91
