About your system
Back-panel features and indicators
圖
1. Back-panel features and indicators
表
1. Back-panel features and indicators
Item
Indicator, button, or
connector
Icon
Description
1
System identification button
The identification buttons on the front and back panels can be used
to locate a particular system within a rack.
When one of these buttons is pressed, the system status indicator
on the back flashes until one of the buttons is pressed again.
Press to toggle the system ID on and off.
If the system stops responding during POST, press and hold the
system ID button for more than five seconds to enter BIOS
progress mode.
To reset iDRAC (if not disabled in F2 iDRAC setup), press and hold
the button for more than 15 seconds.
2
System identification connector
Connects the optional system status indicator assembly through
the optional cable management arm.
3
iDRAC8 Enterprise port
Dedicated management port.
4
Half-height PCIe expansion-card
slot (3)
Allows you to connect up to three half-height PCI Express
expansion cards.
5
Serial connector
Allows you to connect a serial device to the system.
6
Video connector
Allows you to connect a VGA display to the system.
7
USB connector (2)
Allows you to connect USB drives to the system. The ports are
USB 3.0-compliant.
8
Full-height PCIe expansion-card
slot (3)
Allows you to connect up to three full-height PCI Express
expansion cards.
9
Ethernet connector (4)
Four integrated 10/100/1000 Mbps NIC connectors
Or
1
About your system
7
