Figure 48. Installing a 2 x 3.5-inch rear drive cage
Next steps
1
Install the rear drive backplane.
2
Connect all the cables to the rear drive backplane.
3
Install all the drives.
4
Follow the procedure listed in
After working inside your system
.
Identifier
GUID-9C6805AD-0A7A-4B54-B43B-5E5151A91633
Status
Released
System memory
The system supports DDR4 registered DIMM (RDIMMs) slots. System memory holds the instructions that are executed by the processor.
NOTE:
MT/s indicates DIMM speed in MegaTransfers per second.
Memory bus operating frequency is 2666 MT/s for the following factors:
•
DIMM type (RDIMM)
•
Number of DIMM slots populated per channel
•
System profile selected (for example, Performance Optimized, or Custom [can be run at high speed or lower])
•
Maximum supported DIMM frequency of the processors
Your system contains 24 memory sockets split into two sets of 12 sockets, one set per processor. Each 12-socket set is organized into six
channels. In each channel, the release tabs of the first socket are marked white, and the second socket black.
100
Installing and removing system components
