Figure 73. Installing the expansion card riser 1
Next steps
1
If removed, install the
expansion cards into the riser
2
Follow the procedure listed in
After working inside your system
.
3
Install any device drivers required for the card as described in the documentation for the card.
Identifier
GUID-936FF1EB-7C0A-4315-B800-CC62D82B27E6
Status
Released
Removing the expansion card riser 2
Prerequisites
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
Before working inside your system
.
3
If applicable, close the PCIe card holder latch on the air shroud to release the full length card.
4
If installed, remove the
expansion cards from the riser
.
5
Remove the
.
6
Disconnect any cables connected to the riser.
Step
To remove expansion card riser 2B, hold the riser by its edges and lift the riser from the riser connector on the system board.
Installing and removing system components
125
