Figure 40. Installing a drive carrier
Next step
If applicable, install the front bezel.
Identifier
GUID-CBC2DFCF-3F32-4FB3-AF60-85359DFA258C
Status
Released
Removing a 2.5-inch drive from the 3.5-inch drive adapter
Prerequisites
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
Before working inside your system
.
3
Remove 3.5-inch drive adapter from the 3.5-inch drive carrier.
NOTE:
A 2.5-inch hot swappable drive is installed in a 3.5-inch drive adapter, which is then installed in the 3.5-inch hot
swappable drive carrier.
Steps
1
Using a Phillips #2 screwdriver, remove the screws from the side of the 3.5-inch drive adapter.
2
Remove the drive from the 3.5-inch drive adapter.
92
Installing and removing system components
