Part Number: 9291458 REV00 12/19 37
Section 3
Operation
6. -F
should be displayed indicating Fahrenheit. Use
the down arrow to change it to
-C
for Celsius and hit
the stand-by button (lower left button) to enter the
change.
7. Push the defrost button (upper left button) to move
out of the display unit menu.
8. Push the defrost button (upper left button) to move
out of the display menu and back to the normal display.
NOTE: For steps 7 and 8, display will return back to normal
display after 30 seconds of inactivity.
N8100BP, N8100-BRP & N8100NBP Operation
The temperature control is used to turn the unit on and
off as well as control the temperature of the cold pan. The
control is located in the machine compartment. To turn the
cold pan off, turn the knob to the off position. The unit must
be turned off when not in use or overnight for defrosting
and cleaning.
If the cold pan is to be used with ice, it is recommended
that the optional perforated bottoms be used. These will
allow ice to melt properly.
These mechanically cooled cold pans are adjusted at
the factory to provide proper operation. However, if it
is necessary to adjust the temperature, turn the knob
clockwise as indicated on the control. Settings are from 1
thru 7 (7 being the coldest).
• Adjustments should be made gradually.
• Several small adjustments will be more effective than
one large adjustment.
• It may take an hour or longer to realize the temperature
change depending on the application and location of
the unit.
