N8600: DROP-IN SELF-CONT
AINED HOT & COLD COMBINA
TION P
AN
Project __________________________
Item ____________________________
Quantity _________________________
CSI Section 11400
Model: N8600
Drop-In Self-Contained Hot & Cold Combination Pan
980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com
Phone: 800-733-8948
Fax: 800-669-0619
Email: info@delfield.com
Approval _________________
Date ____________________
SPECIFICATIONS
Top:
Top is constructed of one-piece 20-gauge
stainless steel.
Interior:
Interior liner is constructed of 18-
gauge stainless steel with a 1” (2.54cm) drain.
Adjustable stainless steel pan rest for flush mount
heating or 2” recessed cooling to accommodate
up to 6” (15.2cm) deep 12”x20” pans, supplied
by others. Stainless steel immersion heater(s)
installed in bottom for wet only heating
operation.
Exterior:
Exterior body is constructed of
24-gauge galvanized steel with high density
polyurethane insulation throughout.
Refrigeration:
Condensing unit is suspended on a
16-gauge galvanized steel frame. Environmentally
friendly HFC-404A refrigerant is utilized.
Temperature controlled by thermostat located next to
condensing unit.
Operation:
Remote control panel contains 3-way
Hot/Cold/Off power switch and thermostat for heated
operation.
Electrical:
All units must be hard wired at
installation.
MODELS
❑
N8630
30” hot & cold combination pan drop-in
❑
N8643
43” hot & cold combination pan drop-in
❑
N8656
56” hot & cold combination pan drop-in
❑
N8669
69” hot & cold combination pan drop-in
OPTIONS AND ACCESSORIES
❑
Additional adaptor bars or plates
❑
Relocate compressor
❑
Remote refrigeration
❑
Automatic water fill
❑
220V/50C electrical
❑
3-phase electrical
❑
Counter protectors
❑
Extended warranty
STANDARD FEATURES
• NSF-4 and NSF-7 certified for hot and cold
operation
• Stainless steel immersion heaters with stainless
steel perforated covers
• Remote control panel with 3-way hot/cold/off
power switch and thermostat for hot operation
• Thermostat for cold operation located next to
condensing unit
• Adjustable pan support for flush mounted hot
operation or 2” recessed cold operation
• 1’’ stainless steel drain with screen
• Stainless steel louver provided
• High density polyurethane foam throughout
• Push-in flange gasket is standard
• Adaptor bars for 12”x20” pans provided
• Environmentally friendly HFC-404A refrigerant
• Standard 90 day labor and one year parts
warranty
❑
N8681
81” hot & cold combination pan drop-in
