26
Part Number: 9291458 REV00 12/19
Installation
Section 2
SELF-CONTAINED COMBO HOT/COLD DROP-IN UNITS
N8600P
For any non-standard installation consult the factory.
1. Cabinet interior minimum dimensions:
Dimension
N8630P
N8643P
N8656P
A
29.75"/76cm
42.5"/108cm
55.25"/140cm
B
29"/74cm
29"/74cm
29"/74cm
C
28"/71cm
28"/71cm
28"/71cm
D
29.75"/76cm
42.5"/108cm
55.5"/140cm
E
25"/64cm
25"/64cm
25"/64cm
F
4.75”/12cm
Min. 2.75”/7cm -
Max. 4.75”/12cm
Dimension
N8669P
N8681P
N86120P
A
68"/173cm
80.75"/205cm 101.75"/258cm
B
29"/74cm
29"/74cm
29"/74cm
C
28"/71cm
28"/71cm
28"/71cm
D
68"/173cm
80.75"/205cm 101.75"/258cm
E
25"/64cm
25"/64cm
25"/64cm
F
4.75”/12cm
Min. 2.75”/7cm -
Max. 4.75”/12cm
2. Place the condensing unit through the counter cutout.
3. Extend the telescoping duct from the front of the
condensing unit to the back of the louver. This will
prevent recirculation of discharge air. Export models do
not have a telescoping duct, skip to step 6.
4. Put eight provided screws through the telescoping
duct side walls to hold it at the desired depth.
22.50”
(57cm)
C
E
D
A
B
18.50”
(47cm)
F
12.25”
(31cm)
4.25”
(11cm)
Use Screws to Secure Desired Depth
3 of 8 Screws Shown
5. Partitions must fully extend front to back and top to
bottom.
6. Louver cutout must extend to bottom of cabinet and
align with condenser face.
NOTE: The louver provided must be installed in front of
