User Manual UX11
10.5
Cleaning or replacing the Pitot tube
Orderable parts:
Part Number
This part comprises
FDG-000058
2 × UX11 Pitot tube
Required tools:
• None
Required parts:
• 1 × Pitot tube
1
Remove the Pitot tube.
2
Either simply replace the part, or blow in the static pressure port hole and in the dynamic total
pressure port to make sure they are not clogged.
3
Attach the Pitot tube on the double barbs on top of the fuselage.
10.6
Cleaning the camera lens
Dirty optics can and will affect your image quality. A dirty height sensor lens can lead to incorrect
detection and a fatal crash during landing.
Make sure to clean both lenses before every flight.
Orderable parts:
Part Number
This part comprises
FDG-000062
Lens cleaning kit
Required tools:
• Lens cleaning kit (lens brush, air blower, lens cleaning tissue, wet wipes)
1
Remove as much dust and dirt as possible from the lens with the lens brush and the air blower.
2
With the wet lens tissue, using a circular motion, gently remove oil, fingerprints, and grime from
the lens surface, working from the center to the edge.
3
Keep the lens cleaning tissue in clean conditions.
Delair
|
676, Rue Max Planck – 31670 Toulouse-Labège, France
|
Tel: +33 (0) 5 82 95 44 06
| www.delair.aero
Capital: 238 110,30 € - APE: 3030Z – Intra-Community VAT number: FR90 53 09 69 781 – 530 969 781 R.C.S. Toulouse
This document is the sole property of Delair and cannot be used or reproduced without the written authorization of Delair.
81