DEHACO B.V.
Kruisbaak 25, 2165 AJ Lisserbroek (NL)
Tel.:+31(0)88 20 20 600
www.dehaco.nl
Dehaco Tera 45, 60, 75, 90. Model year 2016 -
9
of
31
- File:User Manual_Tera 400V Dust Control Unit_UVC6000_v3.0_EN.docx
5.2 Wear parts
Wear parts are components found inside the machine,
which do not fall under the guarantee due to increased
contact with the product.
The wear parts in this machine include:
None.
5.3 Noise emissions
When this user manual was being written, noise levels
in the immediate surroundings of the Dust Control
Unit during operation had not yet been measured.
However, experience with prototypes and past series
has been used to determine that noise emissions
when the machine is operational amount to > 70 dB(A)
at a distance of 1 m.
WARNING!!
Use hearing protection if you work in the
immediate surroundings of the machine.
The estimated noise level causes Dehaco to strongly
recommend wearing hearing protection, although
there are currently no measurements to support this
stance.
5.4 EMC
Electromagnetic compatibility (EMC) relates to
electrical devices interfering with other devices or are
interfered with by other devices and residual current.
The applied Bonfiglioli frequency adjusters comply
with the standards for use in an industrial
environment (NEN-EN 61800-3).
If higher EMC requirements are needed for specific
applications of the TERA, then an optional choke coil
or line filter is available.
Please contact your dealer or DEHACO for a custom
solution.
