DEHACO Dust Control Unit User Manual Download Page 29

Page: 29 / 31

DEHACO B.V.

Kruisbaak 25, 2165 AJ Lisserbroek (NL)

Tel.:+31(0)88 20 20 600

www.dehaco.nl

[email protected]

Dehaco Tera 45, 60, 75, 90. Model year 2016 -

- File:User Manual_Tera 400V Dust Control Unit_UVC6000_v3.0_EN.docx

Fast trailer met TERA on Skid

Locking pins for clamping the skid

17.8 Fast trailer

17.8.1 Description

The fast trailer has been developed so the TERA and

skid can be easily deployed at different locations. The

trailer complies with all applicable RDW requirements.

17.8.2. Specifications

17.8.3 Use

Put the skid on the trailer and clamp it in place using

the locking pins at the rear!!
Drive the trailer to the desired location, and release

the clamps.
Always use both support pillars at the rear so the TERA

has a stable base.

17.8.4 Maintenance

Monthly:

Clean.

Repair damage.

Summary of Contents for Dust Control Unit
































Search results

Summary of Contents for Dust Control Unit

Reviews:

Related manuals for Dust Control Unit

Brands by name

Popular brands

DEHACO Dust Control Unit, User Manual

Search results

Summary of Contents for Dust Control Unit

Reviews:

Related manuals for Dust Control Unit

Brands by name

Popular brands