DEHACO B.V.
Kruisbaak 25, 2165 AJ Lisserbroek (NL)
Tel.:+31(0)88 20 20 600
www.dehaco.nl
Dehaco Tera 45, 60, 75, 90. Model year 2016 -
20
of
31
- File:User Manual_Tera 400V Dust Control Unit_UVC6000_v3.0_EN.docx
Screen 1
Screen 2
Screen 3
17. Options
17.1 Operating the touchscreen
When the power cable is connected, the touchscreen
will activate and display the following start-up screen:
First select the preferred language.
The main screen (screen 2) will then appear.
You can now adjust the following settings (f.l.t.r.)
Top:
•
VENTILATOR
speed can be set to 3 settings.
•
DROPLETS
can be set to fine/medium/large.
•
Water quantity
: use + / – to configure
between 1000 and 4000 l/hr in steps of 500
l/hr.
•
Within:
•
VENTILATOR
can be switched on/off.
•
MOVEMENT
(for swiveling) can be switched
on/off.
•
TRANSPORT POSITION
for transport, see
screen 4.
•
CONFIGURE MOVEMENT
see screen 3.
Now configure the required settings for ventilator
speed, droplet size and water quantity.
Then select “configure movement”; you will see
screen 3.
4 arrow keys
: manual configuration for left/right and
up/down.
→← ←→ keys: reduce and increase the swivel angle
during automatic operation.
VENTILATOR
can be switched on/off (as in screen 2).
MOVEMENT
(for swiveling) can be switched on/off (as
in screen 2).
BACK
can be used to return to screen 2.
All settings have now been configured!
The green
“Ventilator”
and “
Movement”
buttons can
now be used to start the TERA!
