DEHACO B.V.
Kruisbaak 25, 2165 AJ Lisserbroek (NL)
Tel.:+31(0)88 20 20 600
www.dehaco.nl
Dehaco Tera 45, 60, 75, 90. Model year 2016 -
14
of
31
- File:User Manual_Tera 400V Dust Control Unit_UVC6000_v3.0_EN.docx
Basic control panel model 2015
Configure end point for automatic swiveling:
Place the TERA in
MANUAL
operation.
Configure the central point of the swivel range using
the
←()→
buttons.
Put the machine in
AUTO
matic operation; the Dust
Control Unit will then swivel to the left and right, with
the starting position as central point.
The
←()→
buttons can now be used to increase or
decrease the swivel angle. The central point will
remain the same. If adjusted, the angle will
decrease/increase on the left as well as the right-hand
side.
9.3 Switching off
•
Turn off the water supply.
•
Press the OFF button.
•
The ventilator will stop; swiveling will stop;
and the drainage valve will open so excess
water can drain from the water nebuliser. This
will help to prevent legionella during the
summer and frost damage during the winter.
•
Remove the power cable.
IMPORTANT!!
In case of (night-) frost:
1) Disconnect the water supply hose.
2) Open the drain valve.
To prevent frost damage.
