38
6.1.4 Motion/(eFence)/Privacy Mask Setup
In Camera Setup, press
Area/Privacy Mask
to call up Detection/Privacy Mask Setup as
shown.
It used to setup the motion (or eFence) detection settings, including detection area and
sensitivity, when motion (or eFence) is detected for this camera.
Please note that the
motion detection area and sensitivity are also used for the Smart Search information.
There won’t be any Smart Search information stored outside the detection area. So, it’s
better to enable the whole area if the motion detection for the camera is disabled (and
only Smart Search is used).
In Motion Detection Setup, the video area is divided into
many small grids, and the area with
is the area which will
be detected for motion
,
while transparent
grids not detected for motion.
The general operations are as below:
Mouse: Click in the respective item
Select the items to set.
X (
Mouse: Left Click X or Right Click to leave
)
Press this button to escape from this screen, and return to Camera Setup display. If
the contents have been modified, a Save dialog will be shown to ask the user to save
the changes, press
YES
to exit and save,
CANCER
to exit without saving.
Following is a brief description for the operations of detection:
Type
– Press to select the type to set.
Camera
– Press the
Numeric
to select the camera.
Sensitivity
– The sensitivity, 1 – 10, for the motion detection of this camera.
Num Of Grids As Detection
– The “number of grids treated as motion”
Test
– Press this button to test the motion detection of this camera. The detected
Summary of Contents for 16-CH
Page 77: ...77 Edge ...
Page 78: ...78 ...
Page 79: ...79 ...
Page 102: ... 102 7 Set Time Based Refresh 8 Click on OK button to save the settings ...