deeplet 16-CH User Manual Download Page 62

Page: 62 / 104

7. Search/Playback/Archive (Administrator, Supervisor)

There are five ways to search the recorded video/audio for playback:

(a)

Search by time,

(b)

Search by event,

(c)

Smart search,

(d)

Search archived files, and

(e)

POS search.

Left-click the mouse to select the

Search

(Mouse:

)

In Menu display, the Search will

be shown.

The user’s operations are described as the followings:



Mouse: Click in the respective item

Select the items to enter the corresponding Search display.



X (

Mouse: Left Click X or Right Click to leave

)

Press this button to escape from this screen, and return to split-window display.

The Search displays and their operations are described in the following sections,
followed by the playback operations of the searched video/audio.

Note: In split-window display, the user can

press PLAY button (Mouse:

) to call up

Instant Playback Menu.

Select the

Stream

Type

, then select the

Time

for instant

playback.

Summary of Contents for 16-CH









































































































Search results

Summary of Contents for 16-CH

Reviews:

Related manuals for 16-CH

Brands by name

Popular brands

deeplet 16-CH, User Manual

Search results

Summary of Contents for 16-CH

Reviews:

Related manuals for 16-CH

Brands by name

Popular brands