deeplet 16-CH, User Manual

Page: 34 / 104

34

Mirror – whether to mirror, flip, or rotate 180 degrees for the video.

Covert – covert or not. If the camera is covert, the video of this camera can only be
seen if the user has logged in as Administrator.

Video Loss – used to setup the action settings when video loss is detected for this
camera. Press Settings (Mouse: Left click) to call up Video Loss Setup display for the
camera. Please refer to Section 6.1.3 for the details.

Audio – the AUDIO IN corresponding to this camera. The audio data for the selected
AUDIO IN will be recorded with the video data for this camera. Select none (N/A) or
AUDIO Inputs (1-4/8) or “
Camera ” that means audio from IP-CAM / Coaxial Audio
Camera . The default setting is “N/A”.
Note: Coaxial Audio function should use Coaxial Audio Camera (TVI Audio over coax
Cameras), and select the DVR that supports Coaxial Audio.
Note: The audio input number of some models needs to correspond to the camera
number and cannot be paired at will.
Video Encode:

Format – Compression format, H.265 or H.264.

Resolution – the record resolution for the camera.

Record Quality – the record quality for analog camera. The value (1-9, with 1 the
lowest (rough) quality, 9 the highest (fine) quality). The record quality for IP camera,
please refer to
Section 6.1.1 for the details.

Event Record IPS – the IPS (Images Per Second) for analog camera if certain event
(Motion, Alarm) occurs for this camera. This camera will be recorded at this rate for
Post-record time since the event occurs. The Event Record IPS for IP camera, please
refer to
Section 6.1.1 for the details.

Pre-record IPS – the pre-record IPS for analog camera if certain event (Video Loss,
Motion, Alarm) occurs for this camera. This camera is recorded at this rate for
Pre-record time before the event occurs. For this DVR, the value is always the same as
Event Record IPS. The Pre-record IPS for IP camera, please refer to
Section 6.1.1 for
the details.

Normal Record IPS – the normal record IPS for analog camera. This camera will be
recorded at this rate if no event occurs. Please note that for High compression ratio in
Pre-Camera setup, Normal Record IPS is always the same as Event Record IPS. The
Normal Record IPS for IP camera, please refer to Section 6.1.1 for the details.

Actual Event Record IPS – the actual event record IPS set to the cameras because of
the limitation of the total system performance.
Detection:

Type –“N/A” or “Motion”, “eFence” to enable motion (or eFence) detection of this
camera. (Note: this field has no effect for the Smart Search information.)

Area/Privacy Mask – The settings are for motion (or eFence) detection and privacy
mask settings. Please refer to Section 6.1.4 for the details.