Code
Display text
Advice
NP011
CascadeTypeAlgo
Select which type of cascade management is requested, temperature (0) or
power (1) based.
NP012
CascPowerRiseTime
Set the time available for reaching the desired temperature. Typically set this
value to 1. This value will be multiplied by 10.
NP013
CascForceStop Pprim
Select to enable (1) or disable (2) the cascade primary pump.
NP014
Cascade Mode
Select the correct operating mode of the pump in cascade. for heating (1) ,
cooling (2) or automatic (0). In automatic mode the cascade switches between
heating and cooling.
AP111
Can line length
Select the value that is equal to or larger than the actual S-BUS cable length.
9 Installer instructions
88
C 340 / C 640
7762666 - v.02 - 29092020
