manualshive.com logo in svg

DeDietrich C 340 280, Installation And User Manual

Share
Download
DeDietrich C 340 280 Installation And User Manual Download Page 162

Code

Display text

Description

Solution

A.10.47

RoomTempZoneC miss Measure of Room Temperature 

Zone C is missing

Room temperature sensor not detected in zone 

C:

Room temperature sensor is not connected: 

connect the sensor

Room temperature sensor is not connected 

correctly: connect the sensor correctly

Faulty sensor: replace the sensor

A.10.50

T_DHW top D miss

Domestic Hot Water temperature 

sensor top zone DHW is missing

Domestic hot water temperature sensor not de­

tected in zone DHW:

Domestic hot water temperature sensor is not 

connected: connect the sensor

Domestic hot water temperature sensor is not 

connected correctly: connect the sensor cor­

rectly

Faulty sensor: replace the sensor

A.10.54

Temp. Zone DHW 

miss.

Temperature sensor Zone DHW is 

missing

Temperature sensor not detected in zone DHW:

Temperature sensor is not connected: connect 

the sensor

Temperature sensor is not connected correctly: 

connect the sensor correctly

Faulty sensor: replace the sensor

A.10.56

T_DHW Zone AUX 

miss

Domestic Hot Water temperature 

sensor Zone AUX is missing

Domestic hot water temperature sensor not de­

tected in zone AUX:

Domestic hot water temperature sensor is not 

connected: connect the sensor

Domestic hot water temperature sensor is not 

connected correctly: connect the sensor cor­

rectly

Faulty sensor: replace the sensor

12.1.3  Blocking

Tab.130 Blocking codes

Code

Display text

Description

Solution

H.00.36

T 2nd Return Open

Second return temperature sensor is 

either removed or measures a tem­

perature below range

Second return temperature sensor open:

Bad connection: check the wiring and connec­

tors.

Incorrectly fitted sensor: check that the sensor 

has been correctly fitted.

Faulty sensor: replace the sensor.

H.00.37

T 2nd Return Closed

Second return temperature sensor is 

either shorted or measures a tem­

perature above range

Second return temperature sensor short-circuit­

ed:

Bad connection: check the wiring and connec­

tors.

Incorrectly fitted sensor: check that the sensor 

has been correctly fitted.

Faulty sensor: replace the sensor.

H.00.69

TbufferTankOpen

Buffer Tank temperature sensor is 

either removed or measures a tem­

perature below range

Buffer tank temperature sensor open:

Bad connection: check the wiring and connec­

tors

Incorrectly fitted sensor: check that the sensor 

has been correctly fitted

Sensor is not present.

Faulty sensor: replace the sensor

12 Troubleshooting

162

C 340 / C 640

7762666 - v.02 - 29092020

Summary of Contents for C 340 280





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands