manualshive.com logo in svg

DeDietrich AGC 10/15, Installation And Service Manual, Page: 31 / 132

Share
Download
DeDietrich AGC 10/15 Installation And Service Manual Download Page 31

5. Unscrew the 4 lateral holding screws.
6. Pivot the holder by 180°.
7. Screw the 4 lateral holding screws back in.
8. Follow in reverse order for re-assembly.

4

Do not disconnect the switch.

4

The switch remains on the panel and will therefore be

to the left of the control panel.

4.5

Hydraulic connections

4.5.1.

Flushing the system

Installation must be carried out in accordance with the prevailing

regulations, the codes of practice and the recommendations in these

instructions.

n

Fitting the appliance to new installations

4

Clean the installation with a universal cleaner to eliminate debris

from the appliance (copper, flaxen thread, flux).

4

Thoroughly flush the installation until the water runs clear and

shows no impurities.

n

Fitting the appliance to existing installations

4

Remove sludge from the installation.

4

Flush the installation.

4

Clean the installation with a universal cleaner to eliminate debris

from the appliance (copper, flaxen thread, flux).

4

Thoroughly flush the installation until the water runs clear and

shows no impurities.

M002523-B

180°

6

5

7

5

7

6

AGC 10/15 - AGC 15 - AGC 25 - AGC 35

4. Installation

20/01/2012  - 300026081-001-B

29

Summary of Contents for AGC 10/15





































































































































Reviews:

No comments