Dedicated Micros SD Excel Page 89 Installation Manual Download

Page: 89 / 232

Installation Guide

Default

The unit has a range of pre-defined configurations available. As standard the unit can record at 6pps

MPEG4 for up to 120 days (dependent on model). Alternatively the unit can be configured for 2pps JPEG

recording on each camera or for

Multi

Mode operation (note that this will result in the record duration

being determined by the time period the unit is in alarm).

Days Recording

Displays the record duration possible using the

current configuration.

Camera Settings

Choose the rate of non alarm recording to be used from the range of

preset recording profiles. Select from Advanced Rate MPEG4 6pps,

Advanced Rate JPEG 3pps or MultiMode recording.

Record Duration/Enhance Quality The recording duration can be limited to a set number of days; allowing

the recording quality to be enhanced for a shorter

storage period.

Refresh (Purple)

Refreshes the information on the current page.

Summary of Contents for SD Excel









































































































































































































































Search results

Summary of Contents for SD Excel

Reviews:

Related manuals for SD Excel

Brands by name

Popular brands

Dedicated Micros SD Excel, Installation Manual

Search results

Summary of Contents for SD Excel

Reviews:

Related manuals for SD Excel

Brands by name

Popular brands