Dedicated Micros SD Excel Page 32 Installation Manual Download

Page: 32 / 232

SD Excel

Software (Red)

Select this option to display installed software information

(see below).

Time/Date (Green)

Select to open the System->Time and Date page.

Accounts (Yellow)

Select to open the Display->User Accounts page.

Network (Blue)

Select to open the Network->Network page.

Refresh (Purple)

Refreshes the information on the current page.

Software Menu

Software Revision

This identifies the version of software the unit is running.

Codec Revision

This identifies the codec version the unit is running.

Webpage Revision

This identifies the webpage version the unit is running.

Framestore Revision

This identifies the Framestore Revision the unit is running.

PC Apps Revision

This identifies the revision archive of the Viewer and associated PC

Apps software.

Boot Software Rev.

Displays the infrastructure componentry software revision.

Help Videos Rev.

This identifies the version of Help Videos installed on the unit.

Note:

Refer to ‘Go To Viewer->Help Videos’ for guidance on viewing the embedded Help Videos.

Telem PIC Rev.

This identifies the version of the Telemetry control device installed on

the unit.

Applet Version

This identifies the applet version installed on the unit

Note:

Refer to ‘Display Settings->Viewer Defaults’ for guidance on using a remote applet (this can

lessen load times when accessing multiple DVRs/Servers).

Summary of Contents for SD Excel









































































































































































































































Search results

Summary of Contents for SD Excel

Reviews:

Related manuals for SD Excel

Brands by name

Popular brands

Dedicated Micros SD Excel, Installation Manual

Search results

Summary of Contents for SD Excel

Reviews:

Related manuals for SD Excel

Brands by name

Popular brands