Dedicated Micros SD Excel Installation Manual Download Page 81

Page: 81 / 232

Installation Guide

Camera Lens Configuration

This page allows different lens de-warping techniques to be applied to connected cameras. The NVR can

de-warp Fish-eye and Depressive Fish-eye lenses to present a normal aspect image.

Title

Shows the allocated name of the video source.

Lens Type

Allows selection of fisheye, depressive fisheye and normal lens types.

Pitch

Allows the image to be rotated counterclockwise by ninety degrees.

Ratio (H)

Allows the horizontal ratio of a panamorphic lens to be set.

Ratio (V)

Allows the vertical ratio of a panamorphic lens to be set.

Ratio x100

Allows the multiplier ratio of a panamorphic lens to be set.

Cam Setup (Red)

Select to open the Camera -> Setup page

Cam Overview (Green)

Select to open the Camera -> Overview page

Refresh (Purple)

Refreshes the information on the current page.

Summary of Contents for SD Excel









































































































































































































































Search results

Summary of Contents for SD Excel

Reviews:

Dedicated Micros SD Excel, Installation Manual, Page: 81 / 232

Search results

Summary of Contents for SD Excel

Reviews: