Dedicated Micros SD Excel Page 219 Installation Manual Download

Page: 219 / 232

219

Installation Guide

Turbo Mode Profiles

This menu provides detailed information on the camera record settings when the unit is configured to

operate in Turbo Mode. Note that when the unit is not operating in Turbo Mode, no information will be

displayed, refer to the Profile Record menu (Record Settings->Profile Record) for further information on

the Turbo Mode function.

Live Trans (Red)

Select to open the Network->Live Trans page.

Prof Rec (Green)

Select to open the Record Settings->Profile Record page.

Refresh (Purple)

Refreshes the information on the current page.

Summary of Contents for SD Excel









































































































































































































































Search results

Summary of Contents for SD Excel

Reviews:

Related manuals for SD Excel

Brands by name

Popular brands

Dedicated Micros SD Excel, Installation Manual

Search results

Summary of Contents for SD Excel

Reviews:

Related manuals for SD Excel

Brands by name

Popular brands