Dedicated Micros SD Excel Installation Manual Download Page 180

Page: 180 / 232

180

SD Excel

PTZ Program Option

The Program page allows preset settings for PTZ cameras to be established and an ‘Origin’ base position

established for a camera.

Note:

This page will only be available for PTZ cameras.

Red

Preset

If Preset positions have been established for the PTZ

camera, select the Preset option and enter a preset

number. Refer to the ‘Presets’ menu page for further

details on establishing preset positions.

Yellow

Patrol

If Patrols have been established for the camera, select

the Patrol option and enter a number. Refer to the

‘Patrols’ menu page for further details on establishing

Patrols.

Blue

Prog

Opens the ‘Dome Menu Option’ page.

Purple

Opens the next page of the Viewer menu.

Summary of Contents for SD Excel









































































































































































































































Search results

Summary of Contents for SD Excel

Reviews:

Dedicated Micros SD Excel, Installation Manual, Page: 180 / 232

Search results

Summary of Contents for SD Excel

Reviews: