manualshive.com logo in svg

Dedicated Micros SD Excel, Installation Manual, Page: 127 / 232

Share
Download
Dedicated Micros SD Excel Installation Manual Download Page 127

127

Installation Guide

Multicast Method 

Select the multicast forwarding method. Select from ‘SAP’ (to use 

session announcement protocol operation), ‘HTTP’ (to use cgi control 

operation) or ‘SAP+HTTP’ (both methods used simultaneously). 

Enable 

Tick this option to enable multicast.

TTL (Time to Live)  

This option can be configured to limit which users can access the 

images. Enter one of the following numbers:

 

 

0 - restricts video to the same host

 

 

1 - restricts video to the same subnet

 

 

32 - restricts video to the same site

 

 

64 - restricts video to the same region

 

 

128 - restricts video to the same continent

 

 

255 - is unrestricted in scope

Refresh (Purple) 

Refreshes the information on the current page

Summary of Contents for SD Excel









































































































































































































































Reviews:

No comments