80
SD Excel
Remote codec When selected, the unit will utilise the codec in
the remote NetVu connected video server/camera
to allow change Multimode profiles and perform
additional activities such as VMD and Activity
Detection as if the codec was an integral part of the
DVR. If ‘Remote codec’ is selected, the loading on
the unit’s internal codecs will be reduced.
IMPORTANT:
The Remote codec option is only applicable for NetVu Connected cameras.
Note:
Additional IP cameras ( further to existing local camera channels) are remote codec only.
Therefore any NetVu connected cameras will be applied above local camera level.
When ‘Simple Stream’ and ‘Recode Stream’ are selected via ‘IP Mode’, the following options will
be available:
IP Address
Enter the URL address of the image source.
Channel
If the URL is a multichannel device (e.g. DV-IP NV1), this specifies
which channel to use.
Both types
Live Trans (Red)
Select to open the Network->Live Trans page
View Profile (Green)
Select to open the Record Settings->Profile Record page
Basic (Yellow)
Select to open the Serial Ports->Camera page.
Lens Setup (Blue)
Select to open the Camera Lens Configuration page
Refresh (Purple)
Refreshes the information on the current page.
Summary of Contents for SD Excel
Page 1: ...Installation Guide...
Page 228: ...228 SD Excel...
