Dedicated Micros SD Excel Installation Manual Download Page 39

Page: 39 / 232

Installation Guide

Language

This menu allows the system language to be set. Changing the System Language will effect all menu

pages. If required, the language can also be changed for the current session only.

System Language

Select to change the system language setting.

Reset (Red)

Select to reset the unit.

Note:

The unit MUST be reset to implement system language changes, refer to

System Settings->Maintain for guidance on resetting the unit.

Session Language

Select to change the language settings for the current

session only.

Choose

Select to immediately activate session language changes.

Reset (Red)

Select to cycle the power to the unit.

Refresh (Purple)

Refreshes the information on the current page.

Summary of Contents for SD Excel









































































































































































































































Search results

Summary of Contents for SD Excel

Reviews:

Dedicated Micros SD Excel, Installation Manual, Page: 39 / 232

Search results

Summary of Contents for SD Excel

Reviews: