manualshive.com logo in svg

Dedicated Micros SD Excel, Installation Manual, Page: 62 / 232

Share
Download
Dedicated Micros SD Excel Installation Manual Download Page 62

62

SD Excel

Upgrade Switch

This page provides the option to upgrade a selected switch (or all switches). Upgrades for the  

Layer 3 Enhanced CCTV Switch are included in the upgrade files for the SD Excel and are loaded to the 

switch from the NVR.

Once a switch is connected and auto-discovered, the connected NVR can upgrade it. Select the switch 

to be upgraded and press the Upgrade button. The NVR sends the required file to the switch and 

automatically restarts it.
Upgrade Switch 

Use the drop down to select the switch to be upgraded, or upgrade all 

switches using the ‘All Switches’ option.

Progress 

The entry shows the status of the switch upgrade.

CIP Settings (Red) 

Select to open the Closed IPTV->Settings page.

Upgrade (Yellow) 

Begins the forced upgrade of the switch.

Refresh (Purple) 

Refreshes the information on the current page.

Summary of Contents for SD Excel









































































































































































































































Reviews:

No comments