Dedicated Micros SD Excel Installation Manual Download Page 7 | Manualshive

Page: 7 / 232

Dedicated Micros SD Excel Installation Manual Download Page 7

7

Installation Guide

CE Mark

If this product is marked with the CE symbol it indicates compliance with all applicable directives.
Directive 89/336/EEC.
A ‘Declaration of Conformity’ is held at Dedicated Micros Ltd.,
1200 Daresbury Park, Daresbury, Cheshire, WA4 4HS, UK.

Laser

The unit supports an integrated CD-R/DVD-R writer, the following are additional warnings associated with

installing and operating the CD-R/DVD-R writer, please pay particular attention to this information.

• Caution - Use of controls or adjustments or performance of procedures other than those

specified herein may result in hazardous radiation exposure.

• To prevent exposure to laser emanations (harmful to the eyes), do not attempt to

disassemble this unit.

«
...
5
6
7
8
9
...
»

Summary of Contents for SD Excel









































































































































































































































Reviews:

No comments