Dedicated Micros SD Excel, Installation Manual, Page: 130 / 232

130
SD Excel
Remote Reporting
This menu details the configuration requirements for the unit to report to a Remote Video Receiving
Centre (RVRC) following alarm activation.
Note: This menu will only be displayed if ‘Remote Reporting’ is selected in the
System -> Features -> System menu.
Primary Hostname This is the IP address or URL of the initial host that the unit will transmit
an alarm message to.
Primary Dial Profile It is possible for the alarm message to be transmitted via the Ethernet
network or a dial up connection.
Secondary Hostname If the unit is unable to contact the primary host, an alternative route
can be identified via a secondary host. If there is only one alarm
receiving IP address, you must enter the details in both the primary and
secondary connection settings.
Secondary Dial Profile It is possible to select a separate dial profile for the secondary host.
Public (NAT) Address This is the public IP (or domain name) for a unit connected to the
Internet via a NAT Router or Firewall. This field should be left blank if
NAT is not used e.g. a private network.
Video Server Port This field allows the RVRC to connect to the unit through a router that
is using port forwarding e.g. if the video server does not appear on port
80 (HTTP), to the external network. Enter the port number used for
forwarding here if required.