Installing the SA7x
4.8 Left Position Guide Rail Plate Installation
c. While supporting the guide rail plate against the cabinet front vertical
upright, extend the mounting bracket to engage the two rear round
stand-offs into hole numbers 64 and 79 on the cabinet rear vertical
upright.
Figure 4–6 SA900 Mounting Rail Holes
d. Insert and tighten the three shoulder screws and lockwashers in
mounting holes 65, 71, and 78.
e. From the front, insert and tighten the three shoulder screws and
lockwashers in mounting holes 65, 71, and 78.
f. Insert and tighten a flathead screw through the top hole in the guide rail
plate to the U-nut mounted on the cabinet front vertical upright.
g. From the rear, insert and tighten two flathead screws through the top and
bottom guide rail plate holes to the two U-nuts mounted on the cabinet
rear vertical upright.
4–12 Installing the SA7x
