Installing the SA7x
4.6 Preparing the SA900 Cabinet
WARNING
While working in the cabinet interior, ac power must be removed from
cabinet components. Failure to do may result in personnel injury as a
result of electric shock.
Prior to performing any of the SA900 procedures, remove ac power from cabinet
components. If the cabinet is installed and operating, spin down all disk drives
and halt tape drives in the cabinet. Switch the circuit breaker on the front of the
cabinet power controller to the off position.
Figure 4–5 SA7x Enclosure Guide Rail Assembly Installation
MOUNTING BRACKET
FLAT HEAD
SCREWS
NUT BAR
LOCKWASHER
SHOULDER
SCREWS
GUIDE RAIL
PLATE ASSEMBLY
CABINET FRONT
VERTICAL UPRIGHT
CABINET REAR
VERTICAL UPRIGHT
U-NUT
#10-32 MACHINE
SCREW
SHOULDER
SCREWS
LOCKWASHER
M R - 0 3 0 5 - 9 2 D G
4–10 Installing the SA7x
