Introducing the SA7x Enclosure
1.1 SA7x Enclosure Overview
Figure 1–1 SA7x Enclosure
RIGHT REAR
DISK DRIVE
POSITION
LEFT REAR
DISK DRIVE
POSITION
FAN
TRANSITION
BOARD 2
OPERATOR
CONTROL
PANEL
RA70 DISK
DRIVE SHOWN
FRONT
COVER
RIGHT FRONT
DISK DRIVE
POSITION
LEFT FRONT
DISK DRIVE
POSITION
DRIVE POWER
SWITCH PANEL
FRAME
CHASSIS
POWER
SUPPLY
CXO-1845D_S
TRANSITION
BOARD 1
MOUNTING
SCREWS
REAR
COVER
(NOT
SHOWN)
You can combine SA7x enclosures into
shadow sets
. When using shadow sets,
remember that when replacing the power supply or transition boards 1 or 2, you
need to remove the power from the enclosure.
RA7x disk drive can be used with any disk drive controller using a standard
disk interface (SDI), including KDA50, KDB50, or KDM50 controller modules,
hierarchical storage controllers (HSCs), and UDA controllers. The drive is
compatible with the Digital Storage Architecture (DSA) and Mass Storage Control
Protocol (MSCP).
1–2 Introducing the SA7x Enclosure
