50 /87
5.3.8.1
ACTIVE MEMORY
The active Memory is the current configuration applied to the unit. Any parameter changed during
normal unit working mode is automatically applied and saved in the current active Memory.
The active Memory is indicated in the sub-menu Active.
Fig. 5.47 – Active Memory menu
To change the active Memory, press the OK key to enter the program mode (blinking arrow in
second row on the right). Press UP or DOWN keys to select Memory desired. Press OK key to
confirm or ESC key to exit routine without saving.
MEMORY AVAILABLE:
M0, M1, M2, M3, M4, M5
Table 5.22 – Memory available
When a Memory is recalled the unit is reconfigured with the parameters saved in that particular
Memory.
5.3.8.2
EDITING A MEMORY
In these menus it is possible enable the editing of a Memory parameters, the editing is not available
for the Active Memory because for this particular Memory the parameters change is executed and
saved in real time.
Fig. 5.48 – Edit Memory menus
A Memory already manually edited has Full state otherwise is Empty. It has no sense to recall an
empty Memory but, if it is recalled, the empty Memory will be an exact copy of the last Active
Memory.
