36 /87
5.3.6
PRESETTING MENU
In this menu it is possible to set the other main parameters of the unit: MONO/STEREO mode,
channels deviation offset, pilot tone frequency and phase shift, AES-EBU and MPX/19KHz Out.
The menu layout is different depending on MONO, STEREO (MPX Int or MPX Ext) mode.
5.3.6.1
MODE: MONO/STEREO
To change the operational mode, select the first entry in the Presettings menu and press the OK key
to enter the program mode (blinking arrow in second row on the right).
Press UP or DOWN keys to select MONO or STEREO. Press OK key to confirm or ESC key to
exit routine without saving.
Fig. 5.26 – Presetting mode
Note: Now in the menu Operat.Mode the channels or the configuration MPX Internal/MPX
External (in case of STEREO mode) have to be activated.
Every change from MONO-to-STEREO or STEREO-to-MONO will set the channels and the MPX
Int/Ext in OFF state so the configuration has to be set again in the menu Operat.Mode.
If MONO mode is enabled the led MONO in the frontal panel will be switched on, in case of
STEREO MPX Internal is enabled the led STEREO will be switched on, in case of STEREO MPX
External is enabled the led MPX will be switched on.
