39 /87
5.3.6.5
TOTAL DEVIATION ADJUSTMENT
In this menu it is possible to adjust an internal circuit offset (in dB) to set the total output signal
deviation to 75KHz (in MONO mode) or 71KHz (in STEREO MODE) regardless the sensitivity
level set in the Sensitivity menu.
Fig. 5.29 – Presetting total deviation adjustment
To change the offset value, press the OK key to enter the program mode (blinking arrow in second
row on the right). Press UP or DOWN keys to increase or decrease the value. Press OK key to
confirm or ESC key to exit routine without saving.
MIN value: -10 dB
MAX value: +10 dB
STEP: ±0.05 dB
Table 5.8 – Total deviation adjustment permitted values
5.3.6.6
RDS, SCA, AUX DEVIATION ADJUSTMENT
In this menu it is possible to adjust an internal circuit offset (in dB) to set the particular auxiliary
channel deviation to 4KHz regardless the sensitivity level set in the Sensitivity menu.
This option is available only in STEREO mode.
Fig. 5.30 – Presetting auxiliary channels deviation adjustment
Press UP or DOWN key to select the channel desired. To change the offset value, press the OK key
to enter the program mode (blinking arrow in second row on the right). Press UP or DOWN keys to
increase or decrease the value. Press OK key to confirm or ESC key to exit routine without saving.
MIN value: -5 dB
MAX value: +5 dB
STEP: ±0.5 dB
Table 5.9 – Auxiliary channels deviation adjustment permitted value
