35 /87
5.3.5
SENSITIVITY MENU
In this menu it is possible to set the sensitivity value in of all available unit input channels, the
sensitivity level will induce a regulation of channels internal attenuators.
A sensitivity value equal to the relative channel input level will cause an output signal deviation of
75 KHz in case of mono signal or 71 KHz in case of stereo signal.
To navigate in this sub-menu press UP or DOWN keys until the channel desired.
Fig. 5.25 – Channels Sensitivity
To change the sensitivity level, press the OK key to enter the program mode (blinking arrow in
second row on the right). Press UP or DOWN keys to increase or decrease the value. Press OK key
to confirm or ESC key to exit routine without saving.
The sensitivity value is applied in real time and only if the relative channel is in ON state (see menu
Operat.Mode).
CHANNELS
MIN value
MAX value
STEP
LEFT, RIGHT
0 dBu
+15 dBu
±0.05 dB
AES-EBU LEFT, RIGHT
-10 dBFS
0 dBFS
±0.05 dB
MPX Ext
0 dBu
+15 dBu
±0.05 dB
RDS, SCA, AUX
-16 dBu
0 dBu
±0.5 dB
Table 5.6 – Sensitivity permitted values
