48 /87
To change the Audio Over level, press the OK key to enter the program mode (blinking arrow in
second row on the right). Press UP or DOWN keys to select desired value. Press OK key to confirm
or ESC key to exit routine without saving.
MIN value: -20 dBu
MAX value: +20 dBu
STEP: ±0.1 dB
Table 5.19 – Audio Over Level permitted values
To setup the Audio Over timeouts navigate to the relative menus with UP or DOWN keys.
Fig. 5.44 – Audio Over timeout menus
To change the Audio Over timeouts, press the OK key to enter the program mode (blinking arrow in
second row on the right). Press UP or DOWN keys to select desired value. Press OK key to confirm
or ESC key to exit routine without saving.
MIN value: 0 sec
MAX value: 1000 sec
STEP: 1 sec
Table 5.20 – Audio Over timeouts permitted values
To disable this warning/alarm set both the timeouts Audio Over T1 and T2 to 0 sec.
5.3.7.7
ALARMS MENU
In this menu it is possible to configure the type of audio event for both Audio Low and Audio Over.
In case the audio event is configured as warning the yellow warning led will be switched on in the
frontal panel and in the history log the event will be saved as warning.
In case the audio event is configured as alarm, the red alarm led will be switched on in the frontal
panel and the event will be saved as alarm in the history log.
Fig. 5.45 – Audio events type menu
