59 /87
6
FRONT PANEL
Not all the functions are available from the LCD display: the most important ones are available
from the front panel keys and leds present on the unit front panel.
6.1
FRONT PANEL KEYS
Reset
In case the unit is completely blocked (Fault status) due for example to the repetition of an alarm
multiple times, the FAULT led will switch on and to restore the functioning of the unit it is
sufficient to press this key (Reset of the alarm/warning/fault status).
Local
In case the led LOCAL is switched on, the unit is in LOCAL mode and all the functions from the
front panel are enabled. If the led is off the unit is in REMOTE mode and it will accept only the
commands given by remote. To change the status of the led it is sufficient to press the key.
ON/OFF
In case the led ON/OFF is switched on, the unit is in ON mode and the RF power is enabled. If the
led is off the unit is in OFF mode (standby) and it is only powered but it will not give any output
power. To change the status of the led it is sufficient to press the key.
