13
17
8
SW 6
B / 4x
G / 4x
H / 4x
F / 4x
C / 11x
J / 11x
K / 11x
E / 4x
D / 7x
A / 4x
M 2
M 2
Small parts box
Festprogramme /
pulsgesteuert
Box Contents
When unpacking the device, make sure you remove the separate parts carefully from the
environmentally friendly cardboard box. Not only to avoid personal injuries, but also to avoid any
damage or loss of parts.
The box contains:
1
ergo_lyps
base frame with drive unit
1 dashboard stand with dashboard & U shaped handle
2 feet set
2 Oscillating poles / right and left
2 Top handle with coating and caps
2 Foot rods / right and left
2 Step plates with corresponding screws
2 Bearing shafts for the oscillating poles
(
right and left
)
2 Bearing shafts / crank lever
(
right and left
)
1 Drinking bottle with holder and screws
8 Swivel joint caps
4 Recessed head screws M 8x50 ( A )
4 Spacer sleeves 12 x 32 mm ( B )
1 Wrench 8 mm
1 Wrench 13/17 mm
1 Allen wrench SW 6
1 Pulse sensor Ear clip
1 Relaxation sensor
1 Software-update-cable
1 User manual
Accessories
Please make sure no part is missing!
Mounting hardware:
The device:
Tools
Unpacking / Box Contents
(with installed crank levers and cover plates)
11 Hexagonal head screws M8 x 20 ( C )
7 Spring washers DIN 127 - 8.1 ( D )
4 Flat head screws M5 x 40 ( F )
4 Washers DIN 9021 8,4 ( E )
4 Washers DIN 125 5,3 ( G )
4 Hexagonal nuts M5 ( H )
4 Curved spring washers ET3159 ( K )
3 Dome nut f.
hex. head screws M8
( J )
ergo_lyps
box contents
Assembly
Summary of Contents for ergo_lyps
Page 1: ...fitness ...