manualshive.com logo in svg

Daum electronic ergo_lyps, User Manual

Share
Download
Daum electronic ergo_lyps User Manual Download Page 42

L1

watt

L1

Description

Miscellaneous

LCD Graphic Display

Visualizing training status and profiles

The LCD graphic display is located in the centre of the dashboard; it is used to simplify the device 
operation and to represent training profiles. It also allows the entry of the user data without errors 
and easily using a menu control system. The 4800 picture elements (pixels) permit the 
representation of the whole power range in 5 watts increments. The training duration is 
represented on the screen at 1 minute interval.

The scale at the left side of the display is graduated in watt. It permits to read absolute watt values 
from 25 to 400 watts.

The scale at the right of the display is the pulse rate scale. It permits to read absolute pulse rate 
values from 40 to 200 pulsations per minute.

The lower border of the display window has the training duration scale, which is graduated 
from 0 to 60 minutes or training steps.

Bar for
additional 
information

Graphic Display

Display field with 71 x 64 Pixels

(H X W)

Power scale in watt

Pulse rate scale

Sample curve of the power in watt

maximum 4864 pixels

Duration scale in minutes or 60 program steps

e.g.
Braking level 
prescription for 
the strength 
program

Summary of Contents for ergo_lyps











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands