1
2
3 / 3a
4
2a
B
T 4
It is possible for the elasticity to drop or become insufficient if the swing feet (left SF/
right SF) are used for an extended period, or when an overweight person uses them.
If the user is overweight (more than 100 kg), then the bike should be used with the
standard feet (2/2a), i. e. without swing feet, or with the optional larger reinforced
swing feet.
Therefore we recommend doing an evaluation of the elasticity of the swing feet upon
reception and at regular intervals. The plastic feet (3/3a) must never touch the floor
while training. If this is not the case, then the micro-cellular rubber pads (4) are
worn out and the swing feet must be replaced. If the user is too overweight,
then he should exercise only with the standard feet (2/2a), i. e. without the swing feet.
The manufacturer is not liable for any damage done to the floor as a consequence
of installing the ergometer. The user must carefully choose the location for installing
the ergometer such that no damage is inflicted on the floor. If in doubt,
we recommend installing an appropriate base (underlay).
Function and installation of the
“swing feet”
Lateral oscillations
Foot crossbar
“swing feet”
Plastic foot left/right
“swing feet”
Elastic micro-cellular rubber pads
Standard foot / front
(with adjusting screw)
"swing feet"
SF left
SF right
Standard foot / rear
(with caster)
Technical Information
Accessory / “swing feet”
Summary of Contents for ergo_lyps
Page 1: ...fitness ...
