5
The saddle can also be inclined and adjusted in the
longitudinal direction.
- Loosen screw (1).
- Position the saddle in the required horizontal
position or shift it to the front or to the rear and
tighten screw (1).
NOTE
To avoid sitting discomfort, the saddle should be set
as horizontal as possible.
Setting the spring suspension of the saddle pillar
The saddle pillar (2) equiped with a spring suspen-
sion can be set to be soft or hard.
The setting is done by means of an Allen wrench
SW6 on the lower end of the saddle pillar.
- To this end loosen the clamp (3) of the saddle
pillar and pull out the saddle.
Turn clockwise = harder
Turn counterclockwise = softer
- Insert the saddle pillar, adjust the saddle height,
and tighten the clamp (3) of the saddle pillar.
Adjusting the saddle
OPERATING classic and premium
5
ergo_bike pedelec
2
3
1
