manualshive.com logo in svg

Daum electronic ergo_bike pedelec classic, User Manual

Share
Download
Daum electronic ergo_bike pedelec classic User Manual Download Page 31

27

GSM/GPRS

 NOTE

GSM stands for 

G

lobal 

S

ystem for 

M

obile Commu-

nications, GPRS stands for 

G

eneral 

P

acket 

R

adio 

S

ervice.

GPRS is a specific system to transmit information 

over the GSM network.
This technology is used, for instance, to connect to 

internet, to download tracks, and to send and re-

ceive SMS messages.
To enable this capability the GSM module in the 

dashboard must be fitted with a standard SIM card.

 ATTENTION

If needed ask a daum electronic dealer to install 

the SIM card for you.

The bikes of the premium series are equipped, in 

addition to the standard equipment of the classic 

series, with a combined GSM/GPS module and with 

a barometric altitude sensor. The GPS module can 

be used anytime. If the user wishes to use the GSM 

module he must fit it with a standard SIM card 

(op-

tional)

.

Display of travelled tracks on the PC

The collected GPS and altitude data are automati-

cally saved to the SD/SDHC card. These data can 

afterwards be analysed with the "ergo_win premi-

um pro" software (e.g. what heart rate achieved at 

which inclination), and exported to Google Earth.
There the complete routing can be represented on 

the ground, and the user can attach his own pictures 

and texts.

Travelling through biking tracks from Internet

The ergo_bike pedelec premium connects to the 

www.GPSies.com web page over GPRS and down-

loads the biking tracks available for the actual geo-

graphical position.

These tracks can then be viewed and selected on 

the display of the pedelec. This way the most beau-

tiful tracks are always available to the biker of the 

ergo_bike pedelec premium, who is automatically 

guided along them.

Antitheft protection

If an ergo_bike pedelec premium is ever stolen, it 

is capable of receiving an SMS message from its 

owner. Then the next time it is turned on it will re-

spond with an SMS containing the coordinates of its 

geographic location. This will inform the owner of 

the exact location of his bike.

Bike rental

The operator can locate his vehicle fleet over In

-

ternet at any moment. He also has the possibility 

to generate his own tracks by simply covering 

them, and then editing them by means of the 

"ergo_win premium pro" software. He can then 

deliver these tracks on a SD/SDHC card to his  

customers, who would comfortably follow them.

Emergency call function

A specific menu option gives the biker of a pedelec 

the possibility of sending an emergency SMS mes-

sage with his location information, thus giving away 

his exact position.

Functions overview

OPERATING premium

27

ergo_bike pedelec

Summary of Contents for ergo_bike pedelec classic

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands