BIKING
Assistance level
Pushing assistance
ATTENTION
Use the pushing assistance (3) only when you
are not sitting on the bicycle.
You can use the pushing assistance in the cases
where riding the ergo_bike is too hazardous, e.g.
in the case of a high slope or rough terrain.
The assistance provided depends on the slope, i.e.:
large slope
high assistance
little slope
low assistance
On larger slopes, pushing the ergo_bike pedelec
will be easier.
NOTE
If the bicycle is stopped or parked, after about 2
minutes the display is first put into standby, and after
about 10 minutes the whole electronic system goes
into standby mode.
To reactivate the display or the drive system press
the red ON/OFF key (5).
In the case of extended upward trips the motor can
run so hot that the temperature sensor in the motor
reduces the electric power to the motor and thus the
motor assistance decreases.
After switching the dashboard ON you can select
the assistance level by means of the specific keys
(1 and 2).
Assistance level (4) on the display:
off
(without motor assistance)
low
(with motor assistance)
normal
(with motor assistance)
high
(with motor assistance)
42
ergo_bike pedelec
5
4
2
1
3
