Daum electronic ergo_bike pedelec classic Page 27 User Manual Download

Page: 27 / 88

SD Card

ATTENTION

The display must be turned OFF when you re-

move or insert an SD card (2). Proper operation

is only guaranteed for SD/SDHC cards provided

by daum electronic. Nevertheless commercially

available SD/SDHC cards can often be used.

NOTE

Daum ergo_bike pedelecs combine premium and

aesthetical fitness training and biking fun. They bring

the proven daum ergometer technology to the roads.

Defineable limit values provide for controlled biking

and a measured enhancement of endurance and fit

ness. All the data, for instance the heart rate, trip time,

speed, and travelled distance can be stored on an

SD card, reviewed and evaluated. An ideal technical

prerequisite not only for therapeutic purposes: health

oriented users can pedal for preset distances under

guidance by the tour manager system

(optional)

and

obtain their individual biological values.

- Remove the cover (1) carefully.
- Press the SD/SDHC card (2) slightly to unlock it

and pull it out.

- Copy the update file on the card.

- Insert the SD/SDHC card (2).
- When inserting the card, the contact pins must

be facing upward.

- Close the cover (1).
- Execute the software update.

NOTE

Optional software

A special PC software will be made available at no

cost on our home page www.daum-electronic.de,

under support, for our pedelecs. With this software

you can process the tour data saved on your SD

card.

An update for our "ergo_win premium pro" software

will be made available on our home page www.

daum-electronic.de, under support. With this soft-

ware you can optionally process the tour data saved

on your SD card.

OPERATING classic and premium

Software update using the SD/SDHC card

ergo_bike pedelec

Summary of Contents for ergo_bike pedelec classic

























































































Search results

Summary of Contents for ergo_bike pedelec classic

Reviews:

Related manuals for ergo_bike pedelec classic

Brands by name

Popular brands

Daum electronic ergo_bike pedelec classic, User Manual

Search results

Summary of Contents for ergo_bike pedelec classic

Reviews:

Related manuals for ergo_bike pedelec classic

Brands by name

Popular brands